Lancool II Mesh Performance – Lian Li Mid Tower Case

Sale!

35,000.00 38,200.00

Share

    Born to push the limits

     

    LANCOOL II MESH Performance features a mesh front panel and mesh bottom left shroud panel, honeycomb vent design, and built-in PWM fans, ensuring bountiful airflow is delivered to your components while the system runs at peak performance.

    With the mesh front, LANCOOL II MESH makes great airflow in the chassis, Packing three PWM fans, two front 140mm fans, and one rear 120mm fan effectively cooling the component in the user’s PC build and able to be controlled by the button on the I/O port. 9 drive mounting space and supports 384mm maximum GPU length and 176mm maximum height clearance. Solution for the cable management with double tempered glass to view the interior.

    Warranty: Standard Checking Warranty

    Availability: On Order

     

    Please note: Prices may vary due to fluctuations in the exchange rate.

    Born to push the limits

    LANCOOL II MESH Performance features a mesh front panel and mesh bottom left shroud panel, honeycomb vent design, and built-in PWM fans, ensuring bountiful airflow is delivered to your components while the system runs at peak performance.

    THE ULTIMATE CHASSIS FOR BEGINNERS AND ENTHUSIASTS ALIKE

    EXQUISITE STEEL CRAFTSMANSHIP

    Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system, allowing it to run at peak performance.

    MORE ADVANCED COOLING SUPPORT

    Optimized airflow is a result of the collaboration between the brand-new mesh design, additional exhaust vent holes, and three high-performance PWM cooling fans.

    MESH FRONT PANEL

    HONEYCOMB VENTS

    MESH BOTTOM LEFT SHROUD PANEL

    HIGH-PERFORMANCE BUILT-IN PWM FANS

    2 x 140mm PWM intake fans pre-installed at the front and 1 x 120mm exhaust fan in the back of the PERFORMANCE EDITION produce ample airflow, keeping your system running at peak performance.

    Front: 2 x 140mm PWM fans

    140mm PWM fans

    • RPM range: 600~1200 RPM
    • Static pressure: 1.49mmH2O (maximum)
    • Airflow: 60.56 CFM (maximum)

    Back: 1 x 120mm PWM fans

    120mm PWM fans

    • RPM range: 600~1500 RPM
    • Static pressure: 1.78mmH2O (maximum)
    • Airflow: 54.6 CFM (maximum)

    EXPERIENCE FAN CONTROL ON A WHOLE NEW LEVEL

    The four-mode fan controller on the top front allows you to experience fan control on a whole new level. Select L for casual use like internet browsing, and press H when you’re pushing your GPU(s) and CPU hard.

    RPM duty

    The included hub supports up to 6 PWM fans with either 3-PIN or 4-PIN headers.

    Note! The hub supports fans with either a 3-PIN or 4-PIN header. However, if you intend to synchronize and control fan speed and noise level for the added fans via the fan controller, the added fans should have 4-PIN PWM headers.

    MODULAR PSU SHROUD COVER

    The space between the top and bottom chamber now features two removable PSU shroud covers to house either 2 x 2.5” SSDs or can be removed to fit 2 x 120mm fans.

    Compared to the former integrated design, the modular PSU shroud covers allow users to remove them for an unobstructed airflow between the top and bottom chamber.

    When 2 fans are mounted, and the cover plates removed, ventilation efficiency is even better.

    Even when 2 x SSDs are mounted, the vents on the PSU shroud covers guarantee good ventilation.

    MULTI-WAY FAN/RADIATOR BRACKET

    The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your needs.

    55MM scenario

    Closer to the motherboard for more direct cooling

    110MM scenario

    Closer to the front panel for thick radiators

    HOW TO INSTALL THE MULTI-WAY FAN/RAD BRACKET

    The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your needs.

    ATTENTION!

    Do not install a 140/280MM radiator in the inner side of the bracket otherwise, irreparable deformation might occur. The correct way to install is to mount fans first then place a radiator on top of the fans.

    OPTIMIZED STORAGE CONFIGURATION

    With the modular drive cage, side-mounted SSD bays, and additional SSD space on the modular PSU shroud cover, the LANCOOL II MESH is capable of holding up to 9 drives.

    TOOLLESS SLIDING DRIVE CAGE

    Slide the hard drive cage along its bottom track to the position that best fits your interior configuration.

    DRIVE INSTALLATION GUIDE

    SUPPORT UP TO 9 DRIVES

    Modular drive cage: 3 x 3.5” HDDs/2.5” SSDs

    Side-mounted SSD bays behind motherboard tray:
    2 x 2.5” SSDs
    Side-mounted SSD bays at the bottom right flip shroud:
    2 x 2.5” SSDs

    Note:
    In the condition of using the included riser cable (PCIE3.0) of the vertical GPU kit with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow below steps to set up your BIOS to make it compatible.

    1. Make sure that your motherboard BIOS is the latest version. If not, recommend updating to the latest version.
    2. Install your GPU directly to the motherboard and start.
    3. Enter your BIOS, and set the PCIE slot from “Auto” to “Gen 3”. (Example photo as below, for more please read the manual of your motherboard)

    4. Save your settings and turn off the system
    5. Install the PCIE 3.0 riser cable to the motherboard and the GPU, the system would be able to work.

    SPECIFICATIONS

    Model LANCOOL II MESH C performance-X black
    Dimensions (D) 478mm x (W) 229mm x (H) 494mm
    Motherboard E-ATX(width: under 280mm)/ATX/M-ATX/ITX
    PSU 210mm
    Color black
    Materials Steel

    4.0mm tempered glass (both sides)

    Fan Support Front: 2 x 140mm or 3 x 120mm
    Top: 2 x 120mm or 2 x 140mm
    Top of PSU chamber: 2 x 120mm
    Radiator Front (multi-way fan/radiator bracket): 1 x 360/280/240mmTop: 1 x 240mm (aligned to the left)
    VGA Length 384mm
    CPU Clearance 176mm
    Drive Behind MB Tray: 2 x 2.5″ SSDBehind the right flip panel: 2 x 2.5”SSD

    Hard Drive Cage: 3 x 3.5″ HDD/2.5″ SSD

    Above PSU Chamber: 2 x 2.5″ SSD

    Slot 7
    I/O Ports 1 x Fan speed control button1 x TRRS AUDIO

    2 x USB 3.0

    1 x USB 3.1 TYPE-C

    Dust Filters 1 x Top (magnetic), 1 x Bottom (tray)
    Incl Fans 2 x 140mm PWM Fan (front)
    Rated Speed:600 ±200 (30% Duty)-1200RPM ±10%
    Air Flow:60.56CFM
    Noise:25.8dB(A)1x 120mm PWM fan (rear)
    Rated Speed:600 ±200 (30% Duty)-1500RPM ±10%
    Air Flow:54.6CFM
    Noise:26.1dB(A)

    Reviews

    There are no reviews yet.

    Be the first to review “Lancool II Mesh Performance – Lian Li Mid Tower Case”

    Your email address will not be published. Required fields are marked *