O11 Dynamic XL – Lian Li by ROG Large Tower Case

Sale!

67,000.00 70,000.00

Share

    Bigger in every way a mighty powerful chassis. Modular design flexibility for any configuration. Hot-swappable drives. are spacious for multiple and bigger components. Seamlessly supporting E-ATX motherboards.RGB lighting sync front panel addressable RGB.

    Tempered Glass on the Front, and Left Side. E-ATX,ATX Full Tower Gaming Computer Case

    Warranty: Standard Checking Warranty

    Availability: On Order

     

    Please note: Prices may vary due to fluctuations in the exchange rate.

    MODULAR DESIGN
    FLEXIBILITY FOR ANY CONFIGURATION

    HOT-SWAPPABLE DRIVES

    for replacement or addition of storage without shutting down the system

    SPACIOUS FOR MULTIPLE AND BIGGER COMPONENTS

    (D) 471 x (W) 285 x (H) 513mm

    EASIER BUILT PROCESS
    EFFORTLESS CABLE MANAGEMENT

    SEAMLESSLY SUPPORTING
    E-ATX MOTHERBOARDS

    The extension bar (optional) enables support for the rog dominus extreme

    RGB LIGHTING SYNCH
    FRONT PANEL ADDRESSABLE RGB

    Built-in rgb effect controlled by the front panel m|c buttons to synch with the motherboard, switch to the 8th mode

    IMPORTANT NOTE:
    make sure to connect the 3-pin header of the controller to the 3-pin header on the motherboard. do not connect it to the 4-pin header or unrecoverable damages will occur.

    EXQUISITE ALUMINUM EXTERIOR

    I/O ports panel front panel right side case feet

    EFFORTLESS ASSEMBLY

    PUSH AND HOLD TO UNLOCK THE TOP PANEL
    screw-free, quick, and easy

    UPGRADED COOLING SUPPORT

    Stronger airflow support for an additional 120mm fan at the rear
    Enough room for a thick radiator at the bottom even when mounting dual GPU or vertical GPU

    MULTIPLE TYPE OF PORTS TO SATISFY ANY NEED

    4 x usb3.0 + 1 x type c + m|c rgb control buttons
    2 x USB3.0 at top and bottom to cater to different usage scenarios

    MORE FLEXIBILITY FOR GPU CONFIGURATION

    8 slots to support dual GPU or vertically mount GPU
    Supporting high-end GPUs up to 169mm tall

    VERTICAL GPU HOLDER
    (SOLD SEPARATELY)

    OPTIMIZED STORAGE LAYOUT

    Interchangeable, more options for customization possibility

    THE HOT SWAPPABLE DRIVE BAYS
    OFFERS ROOM FOR 4 DRIVES

    4

    6

    3 INSIDE THE DRIVE PANEL BEHIND THE MOTHERBOARD

    3 ON THE MOUNTING BRACKET BESIDE THE MOTHERBOARD
    EACH SECTION IS REPLACEABLE WITH 120MM FANS

    O11D DISTRO-PLATE G1 DESIGNED BY EKWB

    Multiple inlet and outlet ports
    simplifies the water-cooling build process
    argb lighting effect
    come with a powerful ddc3.1 pwm water pump

    Note:
    In the condition of using the included riser cable (PCIE3.0) of the vertical GPU kit with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow bellow steps to set up your BIOS to make it compatible.

    1. Make sure that your motherboard BIOS is the latest version. If not, recommend to update to the latest version.
    2. Install your GPU directly to the motherboard and start.
    3. Enter your BIOS, set the PCIE slot from “Auto” to “Gen 3”. (Example photo as below, for more please read the manual of your motherboard)
    4. Save your settings and turn off the system
    5. 5. Install the PCIE 3.0 riser cable to the motherboard and the GPU, the system would be able to work.

    German Engineering Approved

    The O11 Dynamic series from LIAN LI is developed in collaboration with DER8AUR, a world-renowned German overclocking, water cooling, and gaming evangelist. Always looking for ways to improve computer design and performance, DER8AUER volunteered his time to review and test the design concepts of the O11D series.

    Starting with the first O11 Dynamic and up until the most recent models of the O11D series, LIAN LI appreciates the input from DER8AUER which helped make the O11D series exceptional cases, especially in terms of custom water cooling compatibility, ease of build, and features offered. As a result, DER8AUER’s seal of approval is elegantly displayed beside the LIAN LI logo, standing as a statement of quality and reliability.

    COMPATIBILITY

    SPECIFICATIONS

    Product Name                                 O11 DYNAMIC XL
    Model O11DXL-X black O11DXL-W white O11DXL-A silver
    Color Black White Silver
    Dimensions (D) 471 x (W) 285 x (H) 513 mm
    Motherboard E-ATX/ATX/M-ATX/ITX (need to purchase an extension panel for EEB motherboards)
    PSU 220 mm (max 280mm)
    Materials 1.0 mm ALUMINUM EXTERIOR
    4.0 mm TEMPERED GLASS LEFT SIDE AND FRONT PANELS
    1.0 mm SPCC INTERIOR
    Fan Support 3 X 120 mm (side) + 1 X 120 mm (rear) + 3 X 120 mm/2 x 140 mm (base) + 3 X 120 mm/2 x 140 mm (top) (Optional)
    GPU LENGTH 446 mm
    CPU CLEARANCE 167 mm
    Drive 10 X 2.5” SSD or 6 X 2.5” SSD + 4 X 3.5” HDD
    EXPENSION SLOTS 8
    I/O Ports 4 X USB 3.0 (2 on the front, 2 at the front case feet), 1 X USB 3.1 TYPE-C, 1 X HD AUDIO
    Dust Filters 1 X TOP, 1 X BOTTOM, 2 X SIDE

    Reviews

    There are no reviews yet.

    Be the first to review “O11 Dynamic XL – Lian Li by ROG Large Tower Case”

    Your email address will not be published. Required fields are marked *